The Lockwood 001 Deadlatch: A Force to be Reckoned With

The Lockwood 001 Deadlatch: A Force to be Reckoned With

The Lockwood 001 Deadlatch: A Force to be Reckoned With

The Lockwood 001 deadlatch is a popular choice for security in Australia. But how much force can this lock actually handle? A test was conducted to determine this, and the results are impressive

.

The test was conducted with a Lockwood 001 fitted on a door with a standard 32mm hole, leaving plenty of timber for added strength. This is important because the material of the door and frame, as well as the gap between them, can affect the force required to open a door. The Lockwood 001 also features a door frame strengthener, which is attached to wooden frames with two large screws for a secure closure

.

The deadlatch itself is easily identifiable by the triangular-shaped piece next to the main bolt. This is called the deadlatch trigger, and when it is pushed in, it prevents the latch from being forced back into the lock body

.

In the test, the door withstood an impressive 465 kg of force before the latch bent. While this may seem like a failure, it’s actually a very good effort for a single lock fitted to a door. The fact that the latch bent instead of the door breaking is a testament to the strength of these types of locks.

.

It is worth noting that the standard Lockwood 001 cylinder can be picked open. However, Lockwood offers a range of higher security lock cylinders that can be installed by a locksmith to enhance pick resistance

.

Overall, the Lockwood 001 deadlatch is a strong and reliable lock that can withstand a significant amount of force. Its popularity among locksmiths in Australia is a testament to its quality and effectiveness

The Lock Mob locksmith Toowong are a Brisbane based locksmith and security advisors. Contact us for any locks, key and security problem you may have.

.

 force test force to kick in a door lock mob lock test locksmith locksmith Toowong lockwood